181 cpl www.vishay.com vishay bccomponents revision: 20-may-15 1 document number: 28417 for technical questions, contact: aluminumcaps1@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 conductive polymer aluminum capacitors smd (chip), low impedance fig. 1 features ? long useful life: up to 5000 h at 105 c ?very low esr and hi ghest ripple current ? smd-version with base plate, lead (pb)-free reflow solderable ? material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 applications ? smd technology, for high te mperature refl ow soldering ? industrial and profe ssional applications ? telecommunications and it ? portable and mo bile equipment marking ? rated capacitance (in f) ? rated voltage (in v) ? date code, in accordance with iec 60062 ? blue mark or - sign indicating the cathode (the anode is identified by bevelled edges) ? code indicating group number (l) packaging supplied in blister tape on reel quick reference data description value nominal case sizes ? (l x w x h in mm) 6.6 x 6.6 x 5.9 to 10.4 x 10.4 x 12.6 rated capacitance range, c r 18 f to 820 f tolerance on c r 20 % rated voltage range, u r 4.0 v to 35 v category temperature ra nge -55 c to +105 c endurance test at 105 c 5000 h useful life at 105 c 5000 h shelf life at 0 v, 105 c 1000 h based on sectional specification iec 60384-18 / cecc 32300 climatic category iec 60068 55/105/56 longer 181 cpl 105 c lifetime 180 cps 105 c
181 cpl www.vishay.com vishay bccomponents revision: 20-may-15 2 document number: 28417 for technical questions, contact: aluminumcaps1@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 2 - dimensional outline selection chart for c r , u r , and relevant nominal case sizes (l x w x h in mm) c r (f) u r (v) 4.0 6.3 10 16 20 25 35 18 ?????? 6.6 x 6.6 x 5.9 39 ??? 6.6 x 6.6 x 5.9 - - - 47 ????? 6.6 x 6.6 x 5.9 - 56 ?? 6.6 x 6.6 x 5.9 ? 6.6 x 6.6 x 5.9 - - 68 ?? 6.6 x 6.6 x 5.9 6.6 x 6.6 x 5.9 - - - 82 ??? 8.4 x 8.4 x 6.7 ?? 8.4 x 8.4 x 12 100 ? 6.6 x 6.6 x 5.9 ? 10.4 x 10.4 x 7.7 --- 120 ? 6.6 x 6.6 x 5.9 6.6 x 6.6 x 5.9 8.4 x 8.4 x 6.7 - - - 150 6.6 x 6.6 x 5.9 ? 8.4 x 8.4 x 6.7 8.4 x 8.4 x 6.7 ? 8.4 x 8.4 x 12 10.4 x 10.4 x 12.6 10.4 x 10.4 x 7.7 180 ??? 10.4 x 10.4 x 7.7 --- 220 ? 6.6 x 6.6 x 5.9 ----- 8.4 x 8.4 x 6.7 270 8.4 x 8.4 x 6.7 ? 8.4 x 8.4 x 6.7 ? 8.4 x 8.4 x 12 10.4 x 10.4 x 12.6 - 330 6.6 x 6.6 x 5.9 ? 10.4 x 10.4 x 7.7 ---- 8.4 x 8.4 x 6.7 390 ? 8.4 x 8.4 x 6.7 ?? 8.4 x 8.4 x 12 - - 470 ? 10.4 x 10.4 x 7.7 ?? 10.4 x 10.4 x 12.6 -- 560 8.4 x 8.4 x 6.7 - - - - - - 680 10.4 x 10.4 x 7.7 ------ 820 ??? 10.4 x 10.4 x 12.6 --- 2-pin: w max. s l max. b a2 10 16l min. 0.4 / max. 1.0 (2 x) negative polarity h max. max. 0.3 d ? 6. 3 mm l1 max. 2-pin: w max. s l max. b a2 l 470 6.3v min. 0.4 / max. 1.0 (2 x) h max. max. 0.3 d ? 8 mm to 10 mm l1 max. negative polarity
181 cpl www.vishay.com vishay bccomponents revision: 20-may-15 3 document number: 28417 for technical questions, contact: aluminumcaps1@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 table 1 table 2 mounting the capacitors are designed for automatic placement on to printed-circuit boards. optimum dimensions of soldering pads depend amongst others on soldering method , mounting accuracy, print layout and / or adjacent components. for recommended soldering pad dimensions, refer to fig. 3 and table 3. soldering soldering conditions are defined by the curve, temperature versus time, where th e temperature is that measured on the component during processing. for maximum conditions refer to fig. 4. any temperature versus time curve which does not exceed the specified maximum cu rves may be applied. as a general principle, temperatu re and duration shall be the minimum necessary required to ensure good soldering connections. however, the specified maximum curves should never be exceeded. fig. 3 - recommended so ldering pad dimensions dimensions in millimeters and mass nominal case size l x w x h case code l max. w max. h max. ? d b max. sl1 max. mass (g) 6.6 x 6.6 x 5.9 0606 6.8 6.8 6 6.3 0.8 2.0 7.4 ~ 0.25 8.4 x 8.4 x 6.7 0807 8.6 8.6 7 8 1.1 3.1 9.2 ~ 0.5 8.4 x 8.4 x 12 0812 8.6 8.6 12.5 8 1.1 3.1 9.2 ~ 0.8 10.4 x 10.4 x 7.7 1008 10.6 10.6 8 10 1.3 4.7 11.2 ~ 0.9 10.4 x 10.4 x 12.6 1013 10.6 10.6 12.7 10 1.3 4.7 11.2 ~ 1.3 tape and reel dimensions in millimeters, packaging quantities nominal case size l x w x h case code pitch p 1 tape width w tape thickness t 2 reel diameter packaging quantity per reel 6.6 x 6.6 x 5.9 0606 12 16 6.2 380 1000 8.4 x 8.4 x 6.7 0807 12 16 6.8 380 1000 8.4 x 8.4 x 12 0812 16 16 13.0 380 400 10.4 x 10.4 x 7.7 1008 16 24 10.0 380 500 10.4 x 10.4 x 12.6 1013 16 24 14.0 380 400 aa c b
181 cpl www.vishay.com vishay bccomponents revision: 20-may-15 4 document number: 28417 for technical questions, contact: aluminumcaps1@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 table 3 advanced soldering profile for lead (pb)-free reflow process fig. 4 - maximum temperature load during reflow soldering table 4 note ? temperature measuring point on to p of the case and on terminals. recommended soldering pad dimensions in millimeters case code a b c 0606 1.9 3.5 1.6 0807 3.0 3.5 2.5 0812 3.0 3.5 2.5 1008 4.0 4.0 2.5 1013 4.0 4.0 2.5 reflow soldering conditions for mal2180xxxe3 profile features case code 0606 to 1013 max. time from 25 c to t peak 300 s max. ramp-up rate to 150 c 3 k/s max. time from 150 c to 200 c (t 1 ) 150 s max. time from 190 c to 200 c (t 2 ) 110 s ramp up rate from 200 c to t peak 0.5 k/s to 3 k/s max. time above t liquidus (217 c) (t 3 )90 s max. time above 230 c (t 4 ) 70 s peak temperature t peak 260 c max. time above t peak minus 5 c 40 s ramp-down rate from t liquidus 3 k/s to 6 k/s t 1 200 190 150 25 217 230 t peak time (s) t (c) t 2 t 3 t 4
181 cpl www.vishay.com vishay bccomponents revision: 20-may-15 5 document number: 28417 for technical questions, contact: aluminumcaps1@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note ? unless otherwise specified, all electrical values in table 5 apply at t amb = 20 c, p = 86 kpa to 106 kpa, rh = 45 % to 75 % ordering example conductive polymer 181 cpl series 100 f / 16 v; 20 % nominal case size: 10.4 mm x 10.4 mm x 7.7 mm; taped on reel ordering code: mal218197504e3 table 5 electrical data symbol description c r rated capacitance at 100 hz, tolerance 20 % i r rated rms ripple current at 100 khz, 105 c i l2 max. leakage current after 2 min at u r tan ? max. dissipation factor at 100 hz z max. impedance at 100 khz electrical data and ordering information u r (v) c r (f) nominal case size l x w x h (mm) i r 105 c 100 khz (ma) i l2 2 min (a) tan ? 100 hz z 100 khz 20 c ( ? ) ordering code mal2181... 4.0 150 6.6 x 6.6 x 5.9 2570 120 0.12 0.022 97701e3 270 8.4 x 8.4 x 6.7 3220 216 0.12 0.022 97702e3 330 6.6 x 6.6 x 5.9 2800 264 0.12 0.020 97703e3 330 8.4 x 8.4 x 6.7 3220 264 0.12 0.022 97704e3 560 8.4 x 8.4 x 6.7 3600 448 0.12 0.018 97705e3 680 10.4 x 10.4 x 7.7 4130 544 0.12 0.020 97706e3 6.3 100 6.6 x 6.6 x 5.9 2800 126 0.12 0.022 97301e3 120 6.6 x 6.6 x 5.9 2800 151 0.12 0.022 97302e3 220 6.6 x 6.6 x 5.9 2800 277 0.12 0.020 97303e3 220 8.4 x 8.4 x 6.7 3220 277 0.12 0.022 97306e3 390 8.4 x 8.4 x 6.7 3220 491 0.12 0.022 97307e3 470 10.4 x 10.4 x 7.7 4130 592 0.12 0.020 97308e3 10 56 6.6 x 6.6 x 5.9 2300 112 0.12 0.027 97401e3 68 6.6 x 6.6 x 5.9 2300 136 0.12 0.027 97402e3 120 6.6 x 6.6 x 5.9 2300 240 0.12 0.027 97403e3 150 8.4 x 8.4 x 6.7 2760 300 0.12 0.030 97404e3 150 10.4 x 10.4 x 7.7 3020 300 0.12 0.030 97405e3 270 8.4 x 8.4 x 6.7 3200 540 0.12 0.022 97406e3 330 10.4 x 10.4 x 7.7 3770 660 0.12 0.024 97407e3 16 39 6.6 x 6.6 x 5.9 2200 125 0.12 0.030 97501e3 68 6.6 x 6.6 x 5.9 2200 218 0.12 0.030 97502e3 82 8.4 x 8.4 x 6.7 2800 262 0.12 0.028 97503e3 100 10.4 x 10.4 x 7.7 2670 320 0.12 0.035 97504e3 120 8.4 x 8.4 x 6.7 2800 384 0.12 0.028 97505e3 180 10.4 x 10.4 x 7.7 3430 576 0.12 0.029 97506e3 820 10.4 x 10.4 x 12.6 5400 2624 0.12 0.012 97507e3 20 56 6.6 x 6.6 x 5.9 1300 224 0.12 0.048 97201e3 270 8.4 x 8.4 x 12 4000 1080 0.12 0.021 97202e3 390 8.4 x 8.4 x 12 4950 1560 0.12 0.014 97203e3 470 10.4 x 10.4 x 12.6 4300 1880 0.12 0.020 97204e3 25 47 6.6 x 6.6 x 5.9 1300 235 0.12 0.049 97601e3 150 8.4 x 8.4 x 12 2200 750 0.12 0.028 97602e3 270 10.4 x 10.4 x 12.6 2700 1350 0.12 0.027 97603e3 35 18 6.6 x 6.6 x 5.9 900 126 0.12 0.064 97001e3 82 8.4 x 8.4 x 12 2200 574 0.12 0.029 97002e3 150 10.4 x 10.4 x 12.6 2600 1050 0.12 0.028 97003e3
181 cpl www.vishay.com vishay bccomponents revision: 20-may-15 6 document number: 28417 for technical questions, contact: aluminumcaps1@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 table 6 useful life and endurance table 7 endurance can be calcul ated by formula below: l r : estimated lifetime (h) l 0 : base lifetime specified at maximum operating temperature with applied the dc voltage (h) t 0 : rated maximum operat ing temperature (c) t r : actual ambient temperature (c) table 8 additional electrical data parameter conditions value voltage surge voltage for short period s iec 60384-18, subclause 4.14 u s ? 1.15 x u r reverse voltage for sh ort periods iec 60384-18, subclause 4.16; t a ? 105 c u rev ? 1 v endurance test and useful life series case code useful life at 105 c (h) endurance at 105 c (h) endurance at 85 c (h) 181 cpl 0606 to 1013 5000 5000 50 000 test procedures and requirements test procedure (quick reference) requirements name of test reference mounting iec 60384-18, ? subclause 4.3 shall be performed prior to tests mentioned below; ? reflow soldering; ? for maximum temperature load ? refer to chapter mounting ? c/c: 5 % ? tan ? ? spec. limit ? i l2 ? spec. limit endurance iec 60384-18 / ? cecc 32300, ? subclause 4.15 t amb = 105 c; u r applied; ? for test duration see table 7 ? c/c: 20 % ? tan ? ? 2 x spec. limit ? i l2 ? spec. limit useful life cecc 30301, ? subclause 1.8.1 t amb = 105 c; u r and i r applied; ? for test duration see table 7 ? c/c: 20 % ? tan ? ? 2 x spec. limit ? i l2 ? spec. limit shelf life ? (storage at high ? temperature) iec 60384-18 / ? cecc 32300, ? subclause 4.17 t amb = 105 c; no voltage applied; ? 1000 h ? after test: u r to be applied for 30 min, ? 24 h to 48 h befo re measurement for requirements ? see endurance test above l r = l 0 x 10 t 0 - t r 20 -----------------
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
